American Laundry Products

Clena Hot Metal Cleaner

Dual Usage Industrial Strenght Heavy Duty Cleaner
Description
CLENA HOT METAL CLEANER is a heavy duty flatwork ironer cleaner in paste form.

CLENA HOT METAL CLEANER is designed to clean the alkali, starches and other accumulated residues from your flatwork ironers.

CLENA HOT METAL CLEANER must be used on hot surfaces.

CLENA HOT METAL CLEANER is a pure white paste that spreads and applies easily.

CLENA HOT METAL CLEANER is odorless and contains WX-54 antistatic reducing compound.

CLENA HOT METAL CLEANER can be used for steam thermal and all cylinder ironers

CLENA HOT METAL CLEANER is environmentally safe.
Directions
1. Spread 12 to 18 inches of CLENA HOT METAL CLEANER across the width of a sheet.

2. Fold in half and run through your flatwork ironer at a slow speed close to the right side. Open and rerun sheet at a single thickness.

3. Repeat with a second treated sheet and run through the left side. Open and rerun sheet at a single thickness.

4. Run enough damp sheets through your flatwork ironer to remove unwanted residues that have been cleaned and released by CLENA HOT METAL CLEANER.

5. In the event of excessively dirty chests, it might be necessary to repeat additional times.

6. After cleaning, lubricate with CLENA COTE or CLENA POWDERED WAX.
Warnings
WARNING TREATMENT CLOTHS, when not use, should be stored in a closed steel container to offset

possibility of spontaneous combustion. This is the same precaution required for any paint, oil, grease

or wax saturated fabric in industry as well as home use.
Packaging
Available in:

8 pound pails

40 pound pails
USE WITH BELT CLEANERS
FOR USE WITH FLATWORK IRONER BELT CLEANERS

Recommended for Flatwork Ironers (Steam or Oil Heated) Laundry Presses and all other

Hot Metal Laundry Equipment
USE AS HEAVY DUTY CLEANER
FOR USE AS A HEAVY DUTY CLEANER

1. Apply a liberal amount of CLENA HOT METAL CLEANER to a Kleeno Mitt

2. While equipment is hot rub mitt on dirty surface with circular motions

3. After removing all soil, wipe surface with a clean damp cloth.
Notes
Use CLENA HOT METAL CLEANER on regular basis to keep equipment clean and operating smoothly.