American Laundry Products

Clena High Temperature Lube

High Temperature Ironer Paste Lubricant With Anti-Static Agents (Heat Range 350°- 425°F)
Description
CLENA High TEMP LUBE is a High temperature heat resistant lubricant for oil heated flatwork ironers

CLENA High TEMP LUBE is designed to prevent buildup of alkali, starches and other accumulated residues on your flatwork ironer chests.

CLENA High TEMP LUBE must be used on hot surfaces.

CLENA High TEMP LUBE will not stain, carbonize, or form buildups on flatwork ironer chests.

CLENA High TEMP LUBE is a paste that spreads and applies easily.

CLENA High TEMP LUBE is odorless and contains WX-54 antistatic reducing compound.

CLENA High TEMP LUBE can be used on thermal heated ironers or gas/electric cylinder type ironers where the temperature does not exceed 350°F.

CLENA High TEMP LUBE should be used as a lubricant only.

CLENA High TEMP LUBE is environmentally safe.
Directions
1. Spread 12 to 18 inches of CLENA High TEMP LUBE across the width of a wax and clean cloth, making sure cloth is saturated with CLENA High TEMP LUBE.

2. Run a second time.

3. Once a week, recoat CLENA High TEMP LUBE

4. Regular use of CLENA High TEMP LUBE will reduce ironovers, prevent rolling and increase ironer efficiency.
Warnings
TREATMENT CLOTHS, when not in use, should be stored in a closed steel container to offset possibility of spontaneous combustion. This is the same precaution required for any paint, oil, grease or wax saturated fabric in industry as well as home use.
Packaging
Available in:

40 pound pails

400 pound drums
Notes
Establish a maintenance program of cleaning and waxing regularly with CLENA PRODUCTS. A Clean chest with proper lubrication will increase ironer efficiency.