American Laundry Products

Clena High Temp Paste

Special Flatwork Ironer Cleaner With Anti-Static Agents
CLENA High TEMP PASTE is a heavy duty flatwork ironer cleaner in paste form.

CLENA High TEMP PASTE is designed to clean the alkali, starches and other accumulated residues from your flatwork ironers.

CLENA High TEMP PASTE must be used on hot surfaces.

CLENA High TEMP PASTE is a pure white paste that spreads and applies easily.

CLENA High TEMP PASTE is odorless and contains WX-54 antistatic reducing compound.

CLENA High TEMP PASTE can be used on thermal heated aprons and gas/electic cylinder type aprons where temperatures exceed 350°F as a cleaner only.

CLENA High TEMP PASTE is environmentally safe.
1. Spread 12 to 18 inches of CLENA High TEMP PASTE across the width of a sheet.

2. Fold in half and run through your flatwork ironer at a slow speed close to the right side. Open and rerun sheet at a single thickness.

3. Repeat with a second treated sheet and run through the left side. Open and rerun sheet at a single thickness.

4. Run enough damp sheets through your flatwork ironer to remove unwanted residues that have been cleaned and released by CLENA High TEMP PASTE.

5. In the event of excessively dirty chests, it might be necessary to repeat additional times.

6. After cleaning procedure lubricate with CLENA High TEMP LUBE or CLENA High TEMP FLAKE WAX.
WARNING TREATMENT CLOTHS, when not use, should be stored in a closed steel container to offset possibility of spontaneous combustion. This is the same precaution required for any paint, oil, grease, or wax saturated fabric in industry as well as home use.
Available in:

40 pound pails

400 pound drums
Establish a maintenance program of cleaning and waxing regularly with CLENA PRODUCTS. A clean chest with proper scheduled lubrication will increase ironer efficiency by reducing ironovers and rolling.