Press Head Cleaner and Polisher With Pumice
Description
CLENA FORM #5 is a press head cleaner/polisher with pumice.
CLENA FORM #5 will clean and polish most hot surfaces.
CLENA FORM #5 can be applied using a Kleeno hand mitt for protection.
CLENA FORM #5 will not work on cold surfaces.
CLENA FORM #5 will clean and polish most hot surfaces.
CLENA FORM #5 can be applied using a Kleeno hand mitt for protection.
CLENA FORM #5 will not work on cold surfaces.
Directions
1. Put protective covering on hands and arms.
2. Apply CLENA FORM #5 by saturating a pad of medium grade steel wool or a damp cloth. Clean a small area at a time and wipe clean as you go.
3. Pass team through the grid plates. CLENA FORM #5 must be applied to a hot surface.
4. When the grid plate is completely cleaned remove the grid plate, wash with soap or detergent solution then dry and replace.
2. Apply CLENA FORM #5 by saturating a pad of medium grade steel wool or a damp cloth. Clean a small area at a time and wipe clean as you go.
3. Pass team through the grid plates. CLENA FORM #5 must be applied to a hot surface.
4. When the grid plate is completely cleaned remove the grid plate, wash with soap or detergent solution then dry and replace.
Warnings
WARNING: Do not attempt to clean any hot surfaces without adequate covering on hands and arms.
Packaging
Available in:
6 quarts per case
16 quarts per case
6 quarts per case
16 quarts per case