Description
CLENA High TEMP COMBO is a combination of cleaning agents, heat resistant lubricants and waxes in paste form.
CLENA High TEMP COMBO is designed to clean the alkali, starches and other accumulated residues from your flatwork ironers.
CLENA High TEMP COMBO must be used only on temperatures in the range of 350°F to 425°F or a problem of non melting or jelling will occur.
CLENA High TEMP COMBO is a pure white paste that spreads and applies easily.
CLENA High TEMP COMBO is odorless and contains WX-54 antistatic reducing compound.
CLENA High TEMP COMBO can be used on thermal heated aprons and gas/electric cylinder type aprons where temperatures exeed 350°F.
CLENA High TEMP COMBO is a combination of cleaner and lubricant.
CLENA HI TEMP COMBO is environmentally safe.
CLENA High TEMP COMBO is designed to clean the alkali, starches and other accumulated residues from your flatwork ironers.
CLENA High TEMP COMBO must be used only on temperatures in the range of 350°F to 425°F or a problem of non melting or jelling will occur.
CLENA High TEMP COMBO is a pure white paste that spreads and applies easily.
CLENA High TEMP COMBO is odorless and contains WX-54 antistatic reducing compound.
CLENA High TEMP COMBO can be used on thermal heated aprons and gas/electric cylinder type aprons where temperatures exeed 350°F.
CLENA High TEMP COMBO is a combination of cleaner and lubricant.
CLENA HI TEMP COMBO is environmentally safe.
Directions
1. Spread 12 to 18 inches of CLENA High TEMP COMBO across the width of a sheet.
2. Fold in half and run through your flatwork ironer at a slow speed close to the right side. Open and rerun sheet at a single thickness.
3. Repeat with a second treated sheet and run through the left side. Open and rerun sheet at a single thickness.
4. Run enough damp sheets through your flatwork ironer to remove unwanted residues that have been cleaned and released by CLENA High TEMP COMBO.
5. In the event of excessively dirty chests, it might be necessary to repeat additional times.
6. If ironer covers are extremely dry, it might be necessary to use CLENA High TEMP COMBO a lubricant, to maintain efficiency.
2. Fold in half and run through your flatwork ironer at a slow speed close to the right side. Open and rerun sheet at a single thickness.
3. Repeat with a second treated sheet and run through the left side. Open and rerun sheet at a single thickness.
4. Run enough damp sheets through your flatwork ironer to remove unwanted residues that have been cleaned and released by CLENA High TEMP COMBO.
5. In the event of excessively dirty chests, it might be necessary to repeat additional times.
6. If ironer covers are extremely dry, it might be necessary to use CLENA High TEMP COMBO a lubricant, to maintain efficiency.
Warnings
WARNING TREATMENT CLOTHS, when not use, should be stored in a closed steel container to offset possibility of spontaneous combustion. This is the same precaution required for any paint, oil, grease, or wax saturated fabric in industry as well as home use
Packaging
Available in:
40 pound pails
400 pound drums
40 pound pails
400 pound drums
Notes
Establish a maintenance program of cleaning and waxing regularly with CLENA PRODUCTS. A clean chest with proper lubrication will increase ironer efficiency.
